The resin is a clear, light-amber, low-viscosity epoxy, which, when mixed with hardener, is formulated to wet out wood fibre, fibreglass and a variety of metals. It has excellent adhesive properties which will fill gaps and bridge voids when modified with fillers and can be sanded and shaped afterwards. It possesses excellent thin-film characteristics by flowing out and self-levelling without fisheyeing. The epoxy mix cures to a clear finish so that a natural finish may be achieved. This pack contains the hardner.

The resin is a clear, light-amber, low-viscosity epoxy, which, when mixed with hardener, is formulated to wet out wood fibre, fibreglass and a variety of metals. It has excellent adhesive properties which will fill gaps and bridge voids when modified with fillers and can be sanded and shaped afterwards. It possesses excellent thin-film characteristics by flowing out and self-levelling without fisheyeing. The epoxy mix cures to a clear finish so that a natural finish may be achieved. This pack contins the hardner.

The resin is a clear, light-amber, low-viscosity epoxy, which, when mixed with hardener, is formulated to wet out wood fibre, fibreglass and a variety of metals. It has excellent adhesive properties which will fill gaps and bridge voids when modified with fillers and can be sanded and shaped afterwards. It possesses excellent thin-film characteristics by flowing out and self-levelling without fisheyeing. The epoxy mix cures to a clear finish so that a natural finish may be achieved. This pack contains the hardner.

Spare hardener for the 105 resin.

Thickening additive suitable for bonding, gap filling and filleting. It can be used to prevent resin flow on vertical and overhead surfaces and to control the viscosity of the epoxy. It is often used in combination with other fillers to control the working characteristics of an epoxy mix, e.g. improve the consistency of fairing compounds, to improve abrasion resistance etc.

A blended microballoon based filler used to make fairing putties which are easy to sand but still reasonably strong on a strength to weight basis.

A blend of cellulose cotton fibres, used as a general purpose thickening additive for bonding applications. Epoxy thickened with microfibres provides good wetting out of the substrate and excellent gap filling properties.

Consists of a mix of cellulose fibres and other fillers for use in filleting applications when a natural finish interior is intended. Alcohol or water based stains may be added to adjust the colour.

Glass fibre tapes are mainly used for sealing joints between glass fibre, wooden sections, and binding tubes or pipes.

Wooden mixing sticks with rounded ends, perfect for filleting or scraping excess epoxy from surfaces.

Strong, reusable graduated mixing pot. Cured epoxy easily pops out.

Lightweight seamless disposable gloves help prevent exposure to chemicals. Excellent protection with good finger sensitivity, and dexterity.

Everything needed to complete small repairs around the boat, workshop or home. The Handy Repair Pack includes 250g 105 Resin, 50g of 205 Hardener, 406 Colloidal Silica, 407 Low Density Filler, application brushes, mixing sticks, pipe cleaner, two cleaning pads and step by step instructions.

A guide to a variety of fibreglass repair problems, with over 50 drawings and photographs.

Gougeon Brothers Inc.

A complete guide to restoring wooden structures, improving the appearance, reducing the maintenance, and prolonging the life of boats.

Gougeon Brothers Inc.

Lightweight reusable squeegees for fairing and filling applications, double edged, 90 x 150mm. Pack contains 2 squeegees.

Pack contents 2 X 10 ml syringe.

Pack contents 1 X 10 ml syringe and 1 X 50 ml syringe.